How to Fix Rear View Mirror Ball Joint

Welcome, fellow car enthusiasts! Are you tired of constantly readjusting your rearview mirror while driving? Do you dread replacing your entire mirror just because the ball joint is loose or broken? Well, fear not. We have all been there and know the struggle. However, instead of shelling out money for a new rearview mirror or continuously struggling with a faulty one, we are here to provide a solution – fixing the ball joint. 

How to Fix Rear View Mirror Ball Joint

In this blog post, we will guide you through step by step on how to fix rear view mirror ball joint so that you can drive comfortably without any distractions. Get ready to save some cash and gain satisfaction from completing this repair yourself! So roll up those sleeves and get ready to dive into the world of DIY car fixes with us as we share our tips and tricks on fixing a loose ball joint in your rearview mirror.

Necessary Items

Before we begin, let’s ensure we have everything we need to fix the ball joint in our rearview mirror successfully. Here are the necessary items you will need:

  • A replacement ball joint (can be purchased at any auto parts store)
  • Screwdriver or socket wrench (depending on what type of screws your mirror has)
  • Pliers
  • Safety glasses
  • Gloves (optional, but recommended)
  • Clean cloth or paper towel

Now that we have all the necessary items let’s start fixing that ball joint!

10 Steps on How to Fix Rear View Mirror Ball Joint

Step 1: Remove the Mirror from the Mounting Bracket

First, we need to remove the mirror from its mounting bracket. This will give us better access to the ball joint and make the repair process more accessible. Use your screwdriver or socket wrench to loosen and remove any screws holding the mirror in place. Once removed, gently lift the mirror off of the bracket.

Step 2: Inspect the Ball Joint

Take a Closer Look at the Ball Joint

Take a closer look at the ball joint and assess its condition. Is it loose? Is it broken? If it’s just loose, we can tighten it with pliers. If it’s broken, we must replace the entire ball joint.

Step 3: Tighten the Ball Joint

If your ball joint is just loose, use pliers to tighten it. Be sure to stay within-tighten, as this can cause damage. Once tightened, test the mirror by moving it around to see if it stays in place. If it does, then you can skip ahead to step 10.

Step 4: Remove the Old Ball Joint

If your ball joint is broken and needs to be replaced, use pliers to remove it from the mirror’s arm. Be careful not to damage any other mirror parts while removing it.

Step 5: Prepare the New Ball Joint

Clean your new ball joint with a cloth or paper towel to remove any dirt or debris. This will ensure a smooth and secure fit.

Step 6: Insert the New Ball Joint

Carefully insert the new ball joint into the mirror’s arm. Use pliers to tighten it, ensuring it is secure and not loose.

Step 7: Reattach the Mirror to the Mounting Bracket

Place the mirror back onto the mounting bracket and reattach any screws that were removed in step 1. Make sure they are tightened securely.

Step 8: Test the Mirror’s Movement

Move the mirror around to ensure it can still adjust appropriately without any issues. If it moves smoothly and stays in place, you have successfully replaced the ball joint.

Move the Mirror Around

Step 9: Clean Up

Clean up any tools or debris from the repair process so your car returns to its clean and tidy state. 

Step 10: Admire Your Work

Congratulations, you have successfully fixed the ball joint in your rearview mirror! Take a step back and admire your handy work. Not only did you save money by not having to replace the entire mirror, but you also gained valuable knowledge and experience with car repairs. Well, you were done!

Congrats! You have successfully fixed the ball joint of your rearview mirror. Now, you can drive with peace of mind, knowing your mirror will stay in place.

8 Things to Avoid when Fixing Rear View Mirror Ball Joint

While fixing a loose or broken ball joint may seem simple, there are still some essential things to keep in mind to avoid potential issues. Here are eight things you should avoid when fixing your rearview mirror’s ball joint:

1. Over-tightening the Ball Joint

As mentioned earlier, over-tightening the ball joint can cause damage and worsen the issue. Be sure to tighten it just enough to secure it without putting too much pressure on it.

2. Using the Wrong Tools

It’s essential to use the correct tools for any repair job. Using the wrong one can lead to accidents or damage to the mirror or other parts of the car.

Use the Correct Tools for Any Repair Job

3. Not Wearing Safety Gear

Always wear safety glasses and gloves to protect yourself from hazards when working on your car.

4. Rushing through the Repair

Take your time and follow each step carefully to ensure everything is done correctly. Rushing through could result in an incomplete or faulty repair.

5. Damaging the Mirror or Other Parts

Be careful when handling the mirror and other car parts to avoid accidental damage. This will save you from having to fix additional issues in the future.

6. Not Cleaning the New Ball Joint

Before inserting the new ball joint, clean it thoroughly to ensure a proper fit and function.

7. Skipping Steps

Be sure to complete all steps in the repair process, even if you think it’s unnecessary. Each step is essential to ensure a successful fix.

8. Not Testing the Mirror

Always test the movement of the mirror after completing the repair to ensure it is functioning correctly and stays in place.

By avoiding these things, you can ensure a safe and effective repair of your rearview mirror’s ball joint. Fixing a loose or broken ball joint in your rearview mirror may seem daunting, but with the right tools and knowledge, it can be easily accomplished.

Frequently Asked Questions about Fixing the Rear View Mirror Ball Joint

Can I Use Pliers to Tighten the Ball Joint?

It is recommended to use needle-nose pliers for better precision and control when tightening the ball joint. However, regular pliers can also be used if necessary.

Use Needle-nose Pliers for Better Precision

How Do I Know If the Ball Joint Is Broken?

If your mirror is not in place and appears loose or wobbly, the ball joint is likely broken. You can confirm this by inspecting the joint for any visible damage or by attempting to tighten it with pliers – if it doesn’t tighten, it is broken.

Can I Replace the Ball Joint Without Removing the Mirror?

In some cases, yes. Some mirror models allow the ball joint to be replaced without removing the entire mirror from its mounting bracket. However, this may require a more specialized tool or technique and may only be possible with some mirror models. It’s best to consult the manufacturer’s instructions or seek professional advice.

Is It Possible to Replace the Ball Joint on My Own?

Yes, replacing the ball joint independently is possible if you have the necessary tools and follow the steps carefully. However, if you are uncomfortable with car repairs or need to gain experience with them, seeking professional help is recommended. Safety should always be a top priority when working on vehicles.

How Do I Know When It’s Time to Replace the Ball Joint?

If your mirror continues to have issues staying in place even after tightening the ball joint or if you notice visible damage, it may be time to replace it. Signs of wear and tear, such as rust or looseness, indicate a replacement is needed.  Overall, regular maintenance and checking the condition of your mirror’s ball joint can help prevent more significant issues in the future.  So regularly inspect and clean it as needed to keep your rear view mirror functioning correctly. 


Fixing a loose or broken ball joint in your rearview mirror is not only an easy and cost-effective repair but also allows you to gain valuable knowledge and experience with car repairs. By following the steps on how to fix rear view mirror ball joint outlined in this guide and avoiding common mistakes, you can successfully fix your mirror’s ball joint and ensure safe driving with a secure and functional rearview mirror.

The rearview mirror ball joint is an essential part of your car’s safety equipment, and fixing any issues with it as soon as possible is crucial. Following these simple steps and precautions, you can quickly fix the ball joint without spending money on a mechanic. Remember to prioritize safety first, whether in your car or daily life. And who knows this DIY project will inspire you to tackle other car maintenance tasks alone!

Leave a Comment