Long dusty roads and pouring rain are no match for adventure in a Jeep Wrangler. However, those scenic drives can come with challenges – like not being able to see out the back when it’s raining cats and dogs. Never fear, figuring out how to turn on rear windshield wiper Jeep Wrangler is an easy fix to keep you exploring without limits.
While the rear wiper might seem like an afterthought compared to the front, it serves an important purpose to clear away debris and give you full visibility no matter the conditions. In this guide, I’ll walk you through the simple steps to activate your rear wiper and get back on the trail faster so you can spend more time enjoying the ride.
Step-by-step Guidelines on How to Turn on Rear Windshield Wiper Jeep Wrangler
Step 1: Locate the Rear Wiper Control
To get started, locate the control for the rear windshield wiper. In most Jeep Wranglers, this will be located on the same stalk as your front wipers and turn signal. However, some models may have a separate control on the dashboard or center console. Consult your owner’s manual if you’re having trouble finding it. This control will have three settings: off, intermittent, and continuous.
Step 2: Turn the Control to “Intermittent”
The first setting is for intermittent wiping. This means that your rear wiper will automatically turn on and off at regular intervals to clear away any debris. For light rain or misting conditions, this setting should be sufficient. Simply turn the control to “intermittent” and your rear wiper will begin working its magic. Make sure to adjust the interval speed using the dial on the control if needed.
Step 3: Turn the Control to “Continuous”
If the rain starts coming down harder or you encounter heavy debris, you can turn the control to “continuous”. This setting will keep your rear wiper running continuously until you switch it back to intermittent or off. It’s important to note that using your rear wiper continuously can drain the battery faster, so be mindful of how long you need it on.
Step 4: Turn the Control to “Off”
When you’ve reached your destination or the rain has stopped, simply turn the control back to “off” to stop the rear wiper. It’s always a good idea to turn off your wipers when you’re not using them to conserve battery life and prevent wear and tear on the blades. This will also prevent any accidental activations while you’re driving. Make sure to also turn off your front wipers if you have them on.
Following these simple steps will ensure that you can easily turn on your rear windshield wiper Jeep Wrangler no matter what Mother Nature throws your way. Remember to always adjust the interval speed and use continuous wiping sparingly to conserve battery life.
With this knowledge, you can confidently take on any weather conditions and keep exploring with clear visibility out of both the front and back windows. So, don’t let a little rain or debris stop you from enjoying your Jeep Wrangler to the fullest – now you know how to turn on that rear wiper and keep on adventuring! Happy driving!
Additional Tips and Tricks to Turn on Rear Windshield Wiper Jeep Wrangler
1. If your rear windshield wiper is not functioning properly, the first thing you should do is check the fuse. The fuse box for your Jeep Wrangler can be found under the hood on the passenger side. Open the lid and locate the fuse for the rear wiper. If it appears to be blown, replace it with a new one.
2. Another common issue with rear windshield wipers is a clogged spray nozzle. If your wiper is not spraying properly, use a pin or needle to clear any debris from the nozzle.
3. In colder climates, it’s important to periodically check and replace the rear wiper blade. Frozen or worn-out blades can cause streaks on your windshield and obstruct visibility.
4. If you’re experiencing difficulty turning on your rear wiper, try pressing the button or lever in different directions. Sometimes the mechanism can get stuck and simply needs a little extra force to activate.
5. Regularly cleaning your windshield and rear wiper blades can help maintain their functionality and prevent any buildup of dirt or debris that could affect their performance.
6. If you’re still having trouble with your rear windshield wiper, it’s best to consult a professional mechanic. They can properly diagnose any mechanical issues and offer the best solutions for fixing them.
7. As with any vehicle maintenance, always refer to your Jeep Wrangler’s owner’s manual for specific instructions and troubleshooting tips for your rear windshield wiper.
8. Lastly, don’t forget to regularly check and replace your rear windshield wiper fluid to ensure that you have clear visibility in all weather conditions. Make sure to use a fluid specifically designed for windshield wipers, as regular car wash or antifreeze solutions can damage the rubber blades.
Following these additional tips and tricks can help ensure that the rear windshield wiper on your Jeep Wrangler is always in top working condition, providing you with clear visibility and a safe driving experience. Stay on top of regular maintenance and listen to any unusual sounds or movements from the wiper to catch any potential issues early on.
With proper care, your rear windshield wiper will continue to be a reliable tool for keeping your windshield clear no matter what the weather brings. So, don’t forget to incorporate these tips into your regular maintenance routine and enjoy the seamless operation of your rear wiper every time. Happy driving!
Things You Should Consider to Turn on Rear Windshield Wiper Jeep Wrangler
1. The first thing you need to do is to make sure that your Jeep Wrangler is parked on a flat surface. This will ensure that the rear windshield wiper operates smoothly without any obstructions.
2. Once you have parked your Jeep Wrangler, locate the windshield wiper control knob. It is usually located on the left side of the steering wheel, near the turn signal lever.
3. Once you have located the control knob, turn it clockwise to activate the wiper blades. This will start the rear windshield wiper.
4. It is important to note that most Jeep Wranglers come with a rear windshield wiper delay feature, which allows you to adjust the frequency of the wiper blades’ movement. You can adjust this setting by turning the control knob to the desired delay time.
5. In case you are unable to turn on your rear windshield wiper, check if the wiper blades are obstructed by any debris or ice. If so, clean off the obstruction before trying again.
6. If none of the above steps work, there may be a fault in the electrical system of your Jeep Wrangler. In this case, it is recommended to take your vehicle to a certified mechanic or Jeep dealership for further inspection and repairs.
7. It is important to regularly check and maintain the rear windshield wiper blades of your Jeep Wrangler to ensure its smooth operation. Worn-out or damaged blades should be replaced immediately to avoid any hindrance in visibility while driving.
8. Additionally, it is also advised to regularly clean the rear windshield of your Jeep Wrangler to prevent any buildup of dirt or grime. This will not only help in maintaining clear visibility but also prolong the lifespan of your wiper blades.
9. Turning on the rear windshield wiper may seem like a simple task, but it is important to be cautious while operating any vehicle feature. Always refer to the owner’s manual for specific instructions and safety guidelines.
Following these considerations will ensure that you can effectively turn on your rear windshield wiper in your Jeep Wrangler, providing clear visibility for safe and enjoyable driving. Remember to regularly maintain and inspect this feature to avoid any potential issues or malfunctions. Happy driving!
Frequently Asked Questions
What is the Purpose of a Rear Windshield Wiper on a Jeep Wrangler?
The rear windshield wiper on a Jeep Wrangler serves the same purpose as any other vehicle – to clear away water, debris, or dirt that may obstruct your view while driving. However, due to the rugged nature of Jeeps and their ability to traverse off-road terrain, the rear windshield wiper is particularly useful in removing mud and grime that may accumulate on the back window.
How Do I Turn on the Rear Windshield Wiper on My Jeep Wrangler?
Turning on the rear windshield wiper on a Jeep Wrangler is a simple process. Locate the control switch for the wiper, typically found near the driver’s side door or on the wiper handle itself. Flip the switch to the “on” position and your rear windshield wiper should start working immediately.
Is It Necessary to Use a Rear Windshield Wiper While Driving a Jeep Wrangler?
While it is not always necessary, it is highly recommended to use your rear windshield wiper while driving a Jeep Wrangler. The rugged terrain and off-road adventures that Jeeps are known for can easily result in a dirty back window, obstructing your view while driving. It is always better to be safe than sorry, so make sure to use the rear windshield wiper when needed.
How Often Should I Replace My Rear Windshield Wiper on My Jeep Wrangler?
The lifespan of a rear windshield wiper will vary depending on usage and conditions. However, as a general rule, it is recommended to replace your wiper blades every 6-12 months. If you notice any signs of wear or poor performance, such as streaking or skipping, it may be time to replace them sooner.
Conclusion
Now you know how to turn on rear windshield wiper Jeep Wrangler and the importance of using it while driving. Remember to regularly check and replace your wiper blades for optimal performance. Stay safe on the road, even when off-roading in your Jeep Wrangler! Keep exploring new adventures with a clear view thanks to your reliable rear windshield wiper. Happy driving!